Skip to content

Fault code · Exhaust gas temperature sensor

P2032 Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Circuit Low

P2032 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the Exhaust gas temperature sensor group.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Code details

About code P2032

CodeP2032
DescriptionExhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Circuit Low
AreaPowertrain (engine and transmission)
TypeGeneric (manufacturer-independent)
System groupExhaust gas temperature sensor
StandardSAE J2012 / ISO 15031-6

System

Exhaust gas temperature sensor

Exhaust gas temperature sensors measure the temperature around the turbocharger, catalyst, DPF and SCR. The control unit uses these values to manage DPF regeneration and to protect components from overheating. Codes in this group mostly concern the sensor circuit or the measuring range.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Verified tables

ECU families that carry P2032

This code is found in the fault code table of the ECU families below, verified in EcuPrime.

Car

Truck · Bus

Related operations

Software operations related to this system

Same group

Other Exhaust gas temperature sensor codes

All Exhaust gas temperature sensor codes

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Help

Frequently asked questions

What does fault code P2032 mean?

P2032 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Circuit Low. It belongs to the Exhaust gas temperature sensor group. The exact condition under which it is stored depends on the ECU and the vehicle.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Which ECUs carry P2032?

This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account