Skip to content

Fault code group

Exhaust gas temperature sensor Fault Codes

Exhaust gas temperature sensors measure the temperature around the turbocharger, catalyst, DPF and SCR. The control unit uses these values to manage DPF regeneration and to protect components from overheating. Codes in this group mostly concern the sensor circuit or the measuring range.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

System

What does this system do?

Exhaust gas temperature sensors measure the temperature around the turbocharger, catalyst, DPF and SCR. The control unit uses these values to manage DPF regeneration and to protect components from overheating. Codes in this group mostly concern the sensor circuit or the measuring range.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Code list

Exhaust gas temperature sensor fault codes

DescriptionCode
Cold Start Engine Exhaust Temperature Too LowP050E
Exhaust Gas Temperature Sensor (Bank 1 Sensor 1) – CircuitP0544
Exhaust Gas Temperature Sensor (Bank 1 Sensor 1) – Circuit LowP0545
Exhaust Gas Temperature Sensor (Bank 1 Sensor 1) – Circuit HighP0546
Exhaust Gas Temperature Sensor (Bank 2 Sensor 1) – CircuitP0547
Exhaust Gas Temperature Sensor (Bank 2 Sensor 1) – Circuit LowP0548
Exhaust Gas Temperature Sensor (Bank 2 Sensor 1) – Circuit HighP0549
Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – CircuitP2031
Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Circuit LowP2032
Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Circuit HighP2033
Exhaust Gas Temperature Sensor (Bank 2 Sensor 2) – CircuitP2034
Exhaust Gas Temperature Sensor (Bank 2 Sensor 2) – Circuit LowP2035
Exhaust Gas Temperature Sensor (Bank 2 Sensor 2) – Circuit HighP2036
Exhaust Gas Temperature Sensor (Bank 1 Sensor 1) – Range/PerformanceP2080
Exhaust Gas Temperature Sensor (Bank 1 Sensor 1) – IntermittentP2081
Exhaust Gas Temperature Sensor (Bank 2 Sensor 1) – Range/PerformanceP2082
Exhaust Gas Temperature Sensor (Bank 2 Sensor 1) – IntermittentP2083
Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – Range/PerformanceP2084
Exhaust Gas Temperature Sensor (Bank 1 Sensor 2) – IntermittentP2085
Exhaust Gas Temperature Sensor (Bank 2 Sensor 2) – Range/PerformanceP2086
Exhaust Gas Temperature Sensor (Bank 2 Sensor 2) – IntermittentP2087
Exhaust Gas Temperature Sensor 2/3 (Bank 1) – CorrelationP20E4
Exhaust Gas Temperature Too High (Bank 1)P2428
Exhaust Gas Temperature Too High (Bank 2)P2429
Exhaust Gas Temperature Sensor (Bank 1 Sensor 3) – CircuitP242A
Exhaust Gas Temperature Sensor (Bank 1 Sensor 3) – Range/PerformanceP242B
Exhaust Gas Temperature Sensor (Bank 1 Sensor 3) – Circuit LowP242C
Exhaust Gas Temperature Sensor (Bank 1 Sensor 3) – Circuit HighP242D
Exhaust Gas Temperature Sensor (Bank 1 Sensor 3) – IntermittentP242E
Exhaust Gas Temperature Sensor (Bank 2 Sensor 3) – Circuit LowP2468
Exhaust Gas Temperature Sensor (Bank 1 Sensor 4) – CircuitP246E
Exhaust Gas Temperature Sensor (Bank 1 Sensor 4) – Range/PerformanceP246F
Exhaust Gas Temperature Sensor (Bank 1 Sensor 4) – Circuit LowP2470
Exhaust Gas Temperature Sensor (Bank 1 Sensor 4) – Circuit HighP2471
Exhaust Gas Temperature (Bank 2 Sensor 1) – Out of RangeP247C

Linked codes have their own page; the others are listed in this table only.

Related operations

Software operations related to this system

Help

Frequently asked questions

What do Exhaust gas temperature sensor fault codes indicate?

Exhaust gas temperature sensors measure the temperature around the turbocharger, catalyst, DPF and SCR. The control unit uses these values to manage DPF regeneration and to protect components from overheating. Codes in this group mostly concern the sensor circuit or the measuring range.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Where do the code descriptions on these pages come from?

The code titles are based on the generic SAE J2012 / ISO 15031-6 code definitions and written in our own words. Manufacturer-specific codes are not listed. The ECU families come from fault code tables verified in EcuPrime.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account