OBD fault codes · Emission systems
DTC Fault Codes: Emission Systems and Supported ECUs
Lists generic OBD fault codes (DTC) of emission systems by system group. Each code page shows a short description, the code details and the ECU families that carry the code in their fault code table verified in EcuPrime.
Code search
Look up a fault code
If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.
System groups
Choose fault codes by system
DPF (diesel particulate filter)
The diesel particulate filter (DPF) traps soot from the exhaust and burns it off under certain conditions (regeneration).
See the codes →
EGR (exhaust gas recirculation)
The EGR system returns part of the exhaust gas to the intake side to lower combustion temperature and the formation of nitrogen oxides (NOx).
See the codes →
AdBlue / SCR
The SCR (selective catalytic reduction) system injects AdBlue (urea solution) into the exhaust to convert nitrogen oxides into nitrogen and water vapour.
See the codes →
NOx sensor
NOx sensors measure the amount of nitrogen oxides in the exhaust and are usually fitted before and after the SCR catalyst.
See the codes →
Exhaust gas temperature sensor
Exhaust gas temperature sensors measure the temperature around the turbocharger, catalyst, DPF and SCR.
See the codes →
Exhaust pressure sensor and valve
Exhaust pressure sensors measure the pressure in the exhaust line or the difference across the DPF; on some engines the exhaust flap or pressure valve also belongs to this group.
See the codes →
Catalytic converter
The catalytic converter turns carbon monoxide, hydrocarbons and nitrogen oxides in the exhaust into less harmful gases.
See the codes →
A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.
Help
Frequently asked questions
What is a DTC fault code?
A DTC (Diagnostic Trouble Code) is a fault code that the control unit stores when it detects an unexpected condition in a system. Codes starting with P cover the engine and powertrain; codes starting with P0 and P2 are generic, manufacturer-independent codes.
Where do the code descriptions on these pages come from?
The code titles are based on the generic SAE J2012 / ISO 15031-6 code definitions and written in our own words. Manufacturer-specific codes are not listed. The ECU families come from fault code tables verified in EcuPrime.
Does switching off a fault code fix the fault?
No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).
Start today
A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.
Create free account