Skip to content

ECU family · Car

CONTINENTAL SIMOS 10 — Stage 1, Stage 2, Vmax Off, Decat / Catalyst Off Solutions

The CONTINENTAL SIMOS 10 ECU is used in car vehicles from brands such as AUDI, SEAT, SKODA, VOLKSWAGEN. The EcuPrime library holds verified solution files for this ECU family.

Upload your file freeSee operations
Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Performance

Typical Stage 1 gains

+15–25%power gain
+15–25%torque gain
Petrol (turbo engines)engine type

Typical range; the exact figure depends on the vehicle's hardware and the file. Compatibility is measured at hex level when you upload it.

Operations

Available operations for this ECU

Stage 1Typical gains in power and torque with a livelier throttle response.Stage 2Advanced calibration matched to hardware upgrades such as exhaust or intercooler.Vmax OffThe factory speed limiter is removed in the software.Decat / Catalyst OffCatalyst monitoring and related fault codes are switched off in the software.Lambda / O2 OffLambda (O2) sensor monitoring and related fault codes are switched off in the software.Swirl Flaps OffIntake swirl flap control and related codes are switched off in the software.Stage 3Calibration for extensive hardware changes such as a larger or hybrid turbocharger.

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

Operations

CONTINENTAL SIMOS 10 operations in detail

CONTINENTAL SIMOS 10 Stage 1

Software calibration that optimises the engine's power and torque maps within safe limits. Stage 1 is available for CONTINENTAL SIMOS 10 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Petrol (turbo engines): +15–25% power gain, +15–25% torque gain.

By brand and ECU: VOLKSWAGEN CONTINENTAL SIMOS 10 Stage 1 · AUDI CONTINENTAL SIMOS 10 Stage 1 · SEAT CONTINENTAL SIMOS 10 Stage 1 · SKODA CONTINENTAL SIMOS 10 Stage 1

Stage 1: all supported ECU families

CONTINENTAL SIMOS 10 Stage 2

Stage 2 remap / Stage 2 tune software for hardware-upgraded engines: upload, pick, download. Stage 2 is available for CONTINENTAL SIMOS 10 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: SKODA CONTINENTAL SIMOS 10 Stage 2

Stage 2: all supported ECU families

CONTINENTAL SIMOS 10 Decat

Decat (catalyst off / cat delete) software: upload your ECU file, pick, download. Decat is available for CONTINENTAL SIMOS 10 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: AUDI CONTINENTAL SIMOS 10 Decat

Decat: all supported ECU families

CONTINENTAL SIMOS 10 Lambda Off

Lambda off (O2 off / O2 sensor delete) software: upload your ECU file, pick, download. Lambda Off is available for CONTINENTAL SIMOS 10 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: AUDI CONTINENTAL SIMOS 10 Lambda Off

Lambda Off: all supported ECU families

CONTINENTAL SIMOS 10 Stage 3

Stage 3 remap / Stage 3 tune software for extensive hardware changes such as a bigger turbo. Stage 3 is available for CONTINENTAL SIMOS 10 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: AUDI CONTINENTAL SIMOS 10 Stage 3

Stage 3: all supported ECU families

Brands

Brands using this ECU

AUDICar · Stage 1, Decat / Catalyst Off, Lambda / O2 Off +2VOLKSWAGENCar · Stage 1, Vmax OffSEATCar · Stage 1SKODACar · Stage 1, Stage 2

Flow

How it works

Upload

Upload your original ECU file

Select

The system detects the ECU from the file and enables only genuinely applicable solutions

Process

The solution is verified at hex level and applied

Download & Checksum

Credit is charged only on successful delivery. The checksum is corrected in a separate tab with the built-in PrimeChecksum.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Leave an email and we will let you know when the solution is added.

Upload your file for free — see which operations work

Explore

Related ECU families

SiemensPCR2.1ContinentalSIMOS 18ContinentalSIMOS10.2XContinentalSIMOS 19BoschEDC17CP14BoschEDC16BoschEDC17C64BoschEDC17C46BoschMED17.5.XBoschMED17ContinentalSIMOS 12ContinentalSIMOS 9.1ContinentalSIMOS 16ContinentalSIMOS 8

Help

Frequently asked questions

Can Stage 1 be done on CONTINENTAL SIMOS 10?

Yes. The EcuPrime library has a verified Stage 1 solution for CONTINENTAL SIMOS 10. When you upload your original file, compatibility is measured at hex level.

Can DPF Off be done on CONTINENTAL SIMOS 10?

There is currently no verified DPF Off solution for CONTINENTAL SIMOS 10 in the library. You can upload your file and leave a request; we notify you when it is added.

Which brands use the CONTINENTAL SIMOS 10 ECU?

AUDI, VOLKSWAGEN, SEAT, SKODA, in car vehicles. The links in the brand table lead to each brand's own list of operations.

How many credits does a CONTINENTAL SIMOS 10 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account