Skip to content

Vehicle type · Marine

Marine ECU File Tuning — Stage 1, Stage 2, Vmax Off

Chiptuning and ECU remapping software for boat, yacht and jet ski engine ECU files: upload the original file you read from the marine engine's ECU; the ECU is identified from the file itself and only the operations that apply to your file are enabled. Below are the marine engine brands, the ECU families and the operations with verified solutions in the library.

Upload your file freeSee the brands
Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Brands

Marine engine brands

Tap a brand: its ECUs and operations are on its own page.

IVECO FPT MARINEStage 1, Vmax OffJOHN DEERE MARINEStage 1VOLVO PENTA MARINEStage 1, Stage 2, Vmax Off

Operations

Operations available for marine ECUs

Only operations with a verified solution for this vehicle type in the library are listed.

Stage 1Typical gains in power and torque with a livelier throttle response.Stage 2Advanced calibration matched to hardware upgrades such as exhaust or intercooler.Vmax OffThe factory speed limiter is removed in the software.

Performance

Typical Stage 1 gains

Turbo diesel
+20–30%power gain
+25–35%torque gain
Petrol (turbo engines)
+15–25%power gain
+15–25%torque gain

Typical range; the exact figure depends on the vehicle's hardware and the file. Compatibility is measured at hex level when you upload it.

ECU families

Marine ECU families

Only ECU families with a verified solution for this vehicle type are listed.

Flow

EcuPrime: ECU remapping and chiptuning software

Upload

Upload your original ECU file

Select

The system detects the ECU from the file and enables only genuinely applicable solutions

Process

The solution is verified at hex level and applied

Download & Checksum

Credit is charged only on successful delivery. The checksum is corrected in a separate tab with the built-in PrimeChecksum.

What is an ECU file, and which brands and vehicle types are covered?

ORI versus MOD, the operations you can run on your file and the A–Z brand index on one page.

ECU File →

Help

Frequently asked questions

How much power does a Stage 1 remap add on a marine engine?

Turbo diesel: +20–30% power gain, +25–35% torque gain. Petrol (turbo engines): +15–25% power gain, +15–25% torque gain. Typical range; the exact figure depends on the vehicle's hardware and the file. Compatibility is measured at hex level when you upload it.

Which operations are available for marine ECUs?

Operations with a verified solution for this vehicle type: Stage 1, Stage 2, Vmax Off. Not all of them open on every file; the software enables only the operations that apply to yours.

Which file should I upload as my marine ECU file?

The original (raw) file you read from the ECU with your own tool. The ECU is identified from the file itself; if it is not recognised, the panel asks you to select the vehicle type, make and ECU yourself. The pre-check is free.

How many credits does a marine ECU file job cost?

A module job costs 1 credit (any number of modules in one job); Stage 1 costs 2 credits for cars/bikes and 3 credits for trucks, tractors and construction machines. No credit is charged for a job without a result.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account