Skip to content

Fault code · Catalytic converter

P0437 Catalyst Temperature Sensor (Bank 2 Sensor 1) – Circuit Low

P0437 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the Catalytic converter group.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Code details

About code P0437

CodeP0437
DescriptionCatalyst Temperature Sensor (Bank 2 Sensor 1) – Circuit Low
AreaPowertrain (engine and transmission)
TypeGeneric (manufacturer-independent)
System groupCatalytic converter
StandardSAE J2012 / ISO 15031-6

System

Catalytic converter

The catalytic converter turns carbon monoxide, hydrocarbons and nitrogen oxides in the exhaust into less harmful gases. On petrol engines the control unit usually checks its efficiency by comparing the signals of the lambda sensors before and after it, and stores a fault code when efficiency drops below the threshold. On diesel engines the oxidation catalyst (DOC) may also fall into this group.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Verified tables

ECU families that carry P0437

This code is found in the fault code table of the ECU families below, verified in EcuPrime.

Car

Truck · Bus

Related operations

Software operations related to this system

Same group

Other Catalytic converter codes

All Catalytic converter codes

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Help

Frequently asked questions

What does fault code P0437 mean?

P0437 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: Catalyst Temperature Sensor (Bank 2 Sensor 1) – Circuit Low. It belongs to the Catalytic converter group. The exact condition under which it is stored depends on the ECU and the vehicle.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Which ECUs carry P0437?

This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account