Skip to content

Fault code group

NOx sensor Fault Codes

NOx sensors measure the amount of nitrogen oxides in the exhaust and are usually fitted before and after the SCR catalyst. The control unit uses these readings to adjust AdBlue dosing and to check the efficiency of the system. Codes in this group concern the sensor circuit, its heater or the plausibility of the reading.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

System

What does this system do?

NOx sensors measure the amount of nitrogen oxides in the exhaust and are usually fitted before and after the SCR catalyst. The control unit uses these readings to adjust AdBlue dosing and to check the efficiency of the system. Codes in this group concern the sensor circuit, its heater or the plausibility of the reading.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Code list

NOx sensor fault codes

DescriptionCode
NOx Sensor (Bank 1 Sensor 1) – CircuitP2200
NOx Sensor (Bank 1 Sensor 1) – Range/PerformanceP2201
NOx Sensor (Bank 1 Sensor 1) – Circuit LowP2202
NOx Sensor (Bank 1 Sensor 1) – Circuit HighP2203
NOx Sensor (Bank 1 Sensor 1) – IntermittentP2204
NOx Sensor Heater Control (Bank 1 Sensor 1) – Circuit/OpenP2205
NOx Sensor Heater Control (Bank 1 Sensor 1) – Circuit LowP2206
NOx Sensor Heater Control (Bank 1 Sensor 1) – Circuit HighP2207
NOx Sensor Heater Sense (Bank 1 Sensor 1) – CircuitP2208
NOx Sensor Heater Sense (Bank 1 Sensor 1) – Range/PerformanceP2209
NOx Sensor Heater Control (Bank 1 Sensor 2) – Range/PerformanceP220F
NOx Sensor Heater Sense (Bank 1 Sensor 1) – Circuit LowP2210
NOx Sensor Heater Sense (Bank 1 Sensor 1) – Circuit HighP2211
NOx Sensor Heater Sense (Bank 1 Sensor 1) – IntermittentP2212
NOx Sensor (Bank 2 Sensor 1) – CircuitP2213
NOx Sensor (Bank 2 Sensor 1) – Range/PerformanceP2214
NOx Sensor (Bank 2 Sensor 1) – Circuit LowP2215
NOx Sensor (Bank 2 Sensor 1) – Circuit HighP2216
NOx Sensor (Bank 2 Sensor 1) – IntermittentP2217
NOx Sensor Heater Control (Bank 2 Sensor 1) – Circuit/OpenP2218
NOx Sensor Heater Control (Bank 2 Sensor 1) – Circuit LowP2219
NOx Sensor Heater Control (Bank 2 Sensor 1) – Circuit HighP2220
NOx Sensor Heater Sense (Bank 2 Sensor 1) – CircuitP2221
NOx Sensor Heater Sense (Bank 2 Sensor 1) – Range/PerformanceP2222
NOx Sensor Heater Sense (Bank 2 Sensor 1) – Circuit LowP2223
NOx Sensor Heater Sense (Bank 2 Sensor 1) – Circuit HighP2224
NOx Sensor Heater Sense (Bank 2 Sensor 1) – IntermittentP2225
NOx Sensor (Bank 1 Sensor 2) – CircuitP229E
NOx Sensor (Bank 1 Sensor 2) – Range/PerformanceP229F
NOx Sensor (Bank 1 Sensor 2) – Circuit LowP22A0
NOx Sensor (Bank 1 Sensor 2) – Circuit HighP22A1
NOx Sensor Heater Control – Circuit/OpenP22A3
NOx Sensor Heater Sense Circuit (Bank 1 Sensor 3)P23B4
NOx Sensor (Bank 1 Sensor 1) – Delayed Response High→LowP24F4

Linked codes have their own page; the others are listed in this table only.

Related operations

Software operations related to this system

Help

Frequently asked questions

What do NOx sensor fault codes indicate?

NOx sensors measure the amount of nitrogen oxides in the exhaust and are usually fitted before and after the SCR catalyst. The control unit uses these readings to adjust AdBlue dosing and to check the efficiency of the system. Codes in this group concern the sensor circuit, its heater or the plausibility of the reading.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Where do the code descriptions on these pages come from?

The code titles are based on the generic SAE J2012 / ISO 15031-6 code definitions and written in our own words. Manufacturer-specific codes are not listed. The ECU families come from fault code tables verified in EcuPrime.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account