Fault code · NOx sensor
P22A0 NOx Sensor (Bank 1 Sensor 2) – Circuit Low
P22A0 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the NOx sensor group.
Code details
About code P22A0
| Code | P22A0 |
|---|---|
| Description | NOx Sensor (Bank 1 Sensor 2) – Circuit Low |
| Area | Powertrain (engine and transmission) |
| Type | Generic (manufacturer-independent) |
| System group | NOx sensor |
| Standard | SAE J2012 / ISO 15031-6 |
System
NOx sensor
NOx sensors measure the amount of nitrogen oxides in the exhaust and are usually fitted before and after the SCR catalyst. The control unit uses these readings to adjust AdBlue dosing and to check the efficiency of the system. Codes in this group concern the sensor circuit, its heater or the plausibility of the reading.
A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.
Verified tables
ECU families that carry P22A0
This code is found in the fault code table of the ECU families below, verified in EcuPrime.
Car
Truck · Bus
Related operations
Software operations related to this system
Same group
Other NOx sensor codes
Code search
Look up a fault code
If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.
Help
Frequently asked questions
What does fault code P22A0 mean?
P22A0 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: NOx Sensor (Bank 1 Sensor 2) – Circuit Low. It belongs to the NOx sensor group. The exact condition under which it is stored depends on the ECU and the vehicle.
Does switching off a fault code fix the fault?
No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).
Which ECUs carry P22A0?
This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.
Start today
A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.
Create free account