Skip to content

Fault code · AdBlue / SCR

P06F0 Reductant Control Module Internal Temperature Sensor Circuit

P06F0 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the AdBlue / SCR group.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Code details

About code P06F0

CodeP06F0
DescriptionReductant Control Module Internal Temperature Sensor Circuit
AreaPowertrain (engine and transmission)
TypeGeneric (manufacturer-independent)
System groupAdBlue / SCR
StandardSAE J2012 / ISO 15031-6

System

AdBlue / SCR

The SCR (selective catalytic reduction) system injects AdBlue (urea solution) into the exhaust to convert nitrogen oxides into nitrogen and water vapour. The control unit monitors AdBlue level and quality, the pump and dosing valve, the heaters and the conversion efficiency, and stores a fault code when one of them leaves the expected range. On many vehicles the driver is then warned and performance may be limited.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Verified tables

ECU families that carry P06F0

This code is found in the fault code table of the ECU families below, verified in EcuPrime.

Car

Truck · Bus

Related operations

Software operations related to this system

Same group

Other AdBlue / SCR codes

All AdBlue / SCR codes

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Help

Frequently asked questions

What does fault code P06F0 mean?

P06F0 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: Reductant Control Module Internal Temperature Sensor Circuit. It belongs to the AdBlue / SCR group. The exact condition under which it is stored depends on the ECU and the vehicle.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Which ECUs carry P06F0?

This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account