Skip to content

Fault code · EGR (exhaust gas recirculation)

P046C EGR Sensor A – Range/Performance

P046C is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the EGR (exhaust gas recirculation) group.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Code details

About code P046C

CodeP046C
DescriptionEGR Sensor A – Range/Performance
AreaPowertrain (engine and transmission)
TypeGeneric (manufacturer-independent)
System groupEGR (exhaust gas recirculation)
StandardSAE J2012 / ISO 15031-6

System

EGR (exhaust gas recirculation)

The EGR system returns part of the exhaust gas to the intake side to lower combustion temperature and the formation of nitrogen oxides (NOx). The control unit monitors the EGR valve position, the gas flow and, where fitted, the EGR cooler, and stores a fault code when the commanded and measured values do not match or when it sees an electrical problem in the circuit.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Verified tables

ECU families that carry P046C

This code is found in the fault code table of the ECU families below, verified in EcuPrime.

Car

Truck · Bus

Related operations

Software operations related to this system

Same group

Other EGR (exhaust gas recirculation) codes

All EGR (exhaust gas recirculation) codes

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Help

Frequently asked questions

What does fault code P046C mean?

P046C is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: EGR Sensor A – Range/Performance. It belongs to the EGR (exhaust gas recirculation) group. The exact condition under which it is stored depends on the ECU and the vehicle.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Which ECUs carry P046C?

This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account