Skip to content

Fault code · DPF (diesel particulate filter)

P24A4 Diesel Particulate Filter (Bank 1) – Restriction: Soot Too High

P24A4 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6 and belongs to the DPF (diesel particulate filter) group.

Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Code details

About code P24A4

CodeP24A4
DescriptionDiesel Particulate Filter (Bank 1) – Restriction: Soot Too High
AreaPowertrain (engine and transmission)
TypeGeneric (manufacturer-independent)
System groupDPF (diesel particulate filter)
StandardSAE J2012 / ISO 15031-6

System

DPF (diesel particulate filter)

The diesel particulate filter (DPF) traps soot from the exhaust and burns it off under certain conditions (regeneration). The engine control unit usually estimates the filter load from the differential pressure sensor and exhaust temperatures, and stores the related fault code when a reading falls outside the expected range.

A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.

Verified tables

ECU families that carry P24A4

This code is found in the fault code table of the ECU families below, verified in EcuPrime.

Car

Truck · Bus

Related operations

Software operations related to this system

Same group

Other DPF (diesel particulate filter) codes

All DPF (diesel particulate filter) codes

Code search

Look up a fault code

If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.

Help

Frequently asked questions

What does fault code P24A4 mean?

P24A4 is a generic OBD fault code defined in SAE J2012 / ISO 15031-6: Diesel Particulate Filter (Bank 1) – Restriction: Soot Too High. It belongs to the DPF (diesel particulate filter) group. The exact condition under which it is stored depends on the ECU and the vehicle.

Does switching off a fault code fix the fault?

No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).

Which ECUs carry P24A4?

This code is found in the fault code table of the ECU families listed on this page, verified in EcuPrime. To see the status of your own file, upload it to the panel; the ECU is identified from the file's content.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account