Fault code group
EGR (exhaust gas recirculation) Fault Codes
The EGR system returns part of the exhaust gas to the intake side to lower combustion temperature and the formation of nitrogen oxides (NOx). The control unit monitors the EGR valve position, the gas flow and, where fitted, the EGR cooler, and stores a fault code when the commanded and measured values do not match or when it sees an electrical problem in the circuit.
System
What does this system do?
The EGR system returns part of the exhaust gas to the intake side to lower combustion temperature and the formation of nitrogen oxides (NOx). The control unit monitors the EGR valve position, the gas flow and, where fitted, the EGR cooler, and stores a fault code when the commanded and measured values do not match or when it sees an electrical problem in the circuit.
A fault code is a symptom; on its own it does not tell you the cause. First check live data with a diagnostic tool and inspect wiring, connectors and components. A software operation does not replace fault diagnosis and repair.
Code search
Look up a fault code
If the code has its own page you go straight to it; if it is only listed in a group table you go to its row.
Code list
EGR (exhaust gas recirculation) fault codes
| Description | Code |
|---|---|
| Exhaust Gas Recirculation (EGR) Flow Malfunction | P0400 |
| EGR Flow Insufficient Detected | P0401 |
| EGR Flow Excessive Detected | P0402 |
| EGR Control – Circuit | P0403 |
| EGR Control – Range/Performance | P0404 |
| EGR Sensor A – Circuit Low | P0405 |
| EGR Sensor A – Circuit High | P0406 |
| EGR Sensor B – Circuit Low | P0407 |
| EGR Sensor B – Circuit High | P0408 |
| EGR Sensor A – Circuit | P0409 |
| EGR Temperature Sensor A – Circuit | P040A |
| EGR Temperature Sensor A – Range/Performance | P040B |
| EGR Temperature Sensor A – Circuit Low | P040C |
| EGR Temperature Sensor A – Circuit High | P040D |
| EGR Temperature Sensor A – Intermittent/Erratic | P040E |
| EGR Temperature Sensor A/B – Correlation | P040F |
| EGR Temperature Sensor B – Circuit | P041A |
| EGR Temperature Sensor B – Range/Performance | P041B |
| EGR Temperature Sensor B – Circuit Low | P041C |
| EGR Temperature Sensor B – Circuit High | P041D |
| EGR Temperature Sensor B – Intermittent/Erratic | P041E |
| EGR Control A – Stuck Open | P042E |
| EGR Control A – Stuck Closed | P042F |
| EGR Sensor C – Circuit | P044A |
| EGR Sensor C – Range/Performance | P044B |
| EGR Sensor C – Circuit Low | P044C |
| EGR Sensor C – Circuit High | P044D |
| EGR Sensor C – Intermittent/Erratic | P044E |
| EGR Control B – Circuit | P045A |
| EGR Control B – Range/Performance | P045B |
| EGR Control B – Circuit Low | P045C |
| EGR Control B – Circuit High | P045D |
| EGR Control B – Stuck Open | P045E |
| EGR Control B – Stuck Closed | P045F |
| EGR Sensor A – Range/Performance | P046C |
| EGR Sensor A – Intermittent/Erratic | P046D |
| EGR Sensor B – Range/Performance | P046E |
| EGR Sensor B – Intermittent/Erratic | P046F |
| EGR Sensor B – Circuit | P0486 |
| EGR Throttle Control – Circuit/Open | P0487 |
| EGR Throttle Control – Range/Performance | P0488 |
| EGR Control A – Circuit Low | P0489 |
| EGR Control A – Circuit High | P0490 |
| EGR B Flow Malfunction | P049A |
| EGR B Flow Insufficient Detected | P049B |
| EGR B Flow Excessive Detected | P049C |
| EGR Control A – Position Exceeded Learning Limit | P049D |
| EGR Control B – Position Exceeded Learning Limit | P049E |
| EGR Temperature Sensor C – Circuit | P04CE |
| EGR Temperature Sensor C – Range/Performance | P04CF |
| EGR Temperature Sensor C – Circuit Low | P04D0 |
| EGR Temperature Sensor C – Circuit High | P04D1 |
| EGR Temperature Sensor C – Intermittent/Erratic | P04D2 |
| Excessive Time to Enter Closed Loop EGR Control | P04D8 |
| Closed Loop EGR Control At Limit – Flow Too Low | P04D9 |
| Closed Loop EGR Control At Limit – Flow Too High | P04DA |
| Cold Start EGR A Flow Insufficient Detected | P04DD |
| Cold Start EGR A Flow Excessive Detected | P04DE |
| EGR Temperature Sensor D – Circuit | P04E5 |
| EGR Temperature Sensor D – Range/Performance | P04E6 |
| EGR Temperature Sensor D – Circuit Low | P04E7 |
| EGR Temperature Sensor D – Circuit High | P04E8 |
| EGR Temperature Sensor D – Intermittent/Erratic | P04E9 |
| EGR Control A – Temperature Too High | P04FA |
| EGR Actuator A Control Processor Performance | P04FD |
| EGR Throttle Control – Circuit Low | P2141 |
| EGR Throttle Control – Circuit High | P2142 |
| EGR Vent Control – Circuit/Open | P2143 |
| EGR Vent Control – Circuit Low | P2144 |
| EGR Vent Control – Circuit High | P2145 |
| EGR System – Slow Response | P240F |
| EGR System Performance | P2413 |
| EGR Cooling Valve Control – Circuit/Open | P2425 |
| EGR Cooling Valve Control – Circuit Low | P2426 |
| EGR Cooling Valve Control – Circuit High | P2427 |
| EGR Cooling System Performance | P2457 |
| EGR Cooler Bypass Control – Circuit/Open | P245A |
| EGR Cooler Bypass Control – Range/Performance | P245B |
| EGR Cooler Bypass Control – Circuit Low | P245C |
| EGR Cooler Bypass Control – Circuit High | P245D |
| EGR Cooler Bypass Control (Bank 2) – Circuit Low | P2490 |
| EGR Cooler Bypass Control (Bank 2) – Stuck Closed | P26FC |
Linked codes have their own page; the others are listed in this table only.
Related operations
Software operations related to this system
Help
Frequently asked questions
What do EGR (exhaust gas recirculation) fault codes indicate?
The EGR system returns part of the exhaust gas to the intake side to lower combustion temperature and the formation of nitrogen oxides (NOx). The control unit monitors the EGR valve position, the gas flow and, where fitted, the EGR cooler, and stores a fault code when the commanded and measured values do not match or when it sees an electrical problem in the circuit.
Does switching off a fault code fix the fault?
No. Switching a code off in software does not remove the cause of the fault. Diagnose and repair the fault first. Operations on emission systems such as DTC off are offered only for use permitted by local law (e.g. off-road / motorsport / export).
Where do the code descriptions on these pages come from?
The code titles are based on the generic SAE J2012 / ISO 15031-6 code definitions and written in our own words. Manufacturer-specific codes are not listed. The ECU families come from fault code tables verified in EcuPrime.
Start today
A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.
Create free account