Skip to content

Car · CONTINENTAL SIMOS8.3

AUDI CONTINENTAL SIMOS8.3 — Stage 1, Stage 2, Decat / Catalyst Off Solutions

Verified solutions from the library for AUDI CONTINENTAL SIMOS8.3. Upload your file: the ECU is identified from the file itself and you see the applicable operations without spending credits.

Upload your file freeSee operations
Free pre-checkECU identification and applicable operations without credits
Credit only on successNo charge if it fails
Byte-level checksUnverified results are labelled
PrimeChecksumbuilt-in checksum engine

Performance

Typical Stage 1 gains

+15–25%power gain
+15–25%torque gain
Petrol (turbo engines)engine type

Typical range; the exact figure depends on the vehicle's hardware and the file. Compatibility is measured at hex level when you upload it.

Operations

Available operations for this ECU

Stage 1Typical gains in power and torque with a livelier throttle response.Stage 2Advanced calibration matched to hardware upgrades such as exhaust or intercooler.Decat / Catalyst OffCatalyst monitoring and related fault codes are switched off in the software.

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

ECU familyCONTINENTAL SIEMENS-VDO SIMOS 8.3BrandAUDI

Operations

AUDI CONTINENTAL SIMOS8.3 operations in detail

AUDI CONTINENTAL SIMOS8.3 Decat

Decat (catalyst off / cat delete) software: upload your ECU file, pick, download. Decat is available for AUDI CONTINENTAL SIMOS8.3 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Decat: all supported ECU families

Explore

Other ECUs for AUDI

BoschEDC17CP14BoschEDC17C64BoschEDC17CP20BoschEDC17C46BoschEDC16BoschME7BoschEDC17CP44ContinentalSIMOS8.4ContinentalSIMOS8.2ContinentalSIMOS10.2XContinentalSIMOS8.1ContinentalSIMOS 3ContinentalSIMOS6.2ContinentalSIMOS 6

Flow

How it works

Upload

Upload your original ECU file

Select

The system detects the ECU from the file and enables only genuinely applicable solutions

Process

The solution is verified at hex level and applied

Download & Checksum

Credit is charged only on successful delivery. The checksum is corrected in a separate tab with the built-in PrimeChecksum.

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Leave an email and we will let you know when the solution is added.

Upload your file for free — see which operations work

Help

Frequently asked questions

Can Stage 1 be done on a AUDI CONTINENTAL SIMOS8.3?

Yes. The library holds a verified Stage 1 solution for AUDI CONTINENTAL SIMOS8.3. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with PrimeChecksum.

How many credits does a AUDI CONTINENTAL SIMOS8.3 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Start today

A free account for dealers and tuning pros: upload your file, see which operations work, apply your solution.

Create free account